Welcome to ISONEM USA, Your One Stop Shop For All Paint And Insulation Needs
-
- Waterproofing Products
ISONEM M 35
- Call for Price
- TECHNICAL SPECIFICATIONS pH (25°C): 12.0 – 13.0 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3 Adhesion strength by pull-off test (N/mm2): Crack bridging flexible systems without trafficking ≥ 0.8, with trafficking 1.5 N/mm² Permeability to water vapor (m): 5 ≤ SD ≤ 50 CLASS II Solvent: Water
- Call for Price
-
- Waterproofing Products
ISONEM MD 28
- Call for Price
- TECHNICAL SPECIFICATIONS Density B comp. (25°C, g/mL): 0,90 ± 0,10 pH B comp. (25°C): 7,0 – 9,0 Viscosity B comp. (25°C, mPa.s): 9000 - 12000 Solid content B comp. (% Weight): 48 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3 Adhesion strength by pull-off test (N/mm2): Crack bridging flexible systems without trafficking ≥ 0,8, with trafficking 1,5 N/mm² Permeability to water Vapor…
- Call for Price
-
- Waterproofing Products
ISONEM MS 80
- Call for Price
- Usage Areas It is applied to all kinds of surfaces mineral-based and absorbent. For example; Gross concrete, plaster, brick, briquette, travertine, natural stone, mosaic, gas concrete; tile, etc. It is not applicable to non-absorbent surfaces such as marble, granite, glass, metal, plastic and horizontal absorbent surfaces. ISONEM MS 80 is used to protect the exterior walls of unpainted and absorbent surfaces from…
- Call for Price
-
- Floor Coatings, Waterproofing Products
ISONEM MS 82
- Call for Price
- TECHNICAL SPECIFICATIONS Density (25°C, g/mL): 1,40 ± 0,10 pH (25°C): Not applicable (N/A) Viscosity (25°C, mPa.s): 2000 - 4000 Solid content (% Weight): 70 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W₃ Adhesion strength by pull-off test (N/mm2): Rigid system without trafficking ≥ 1.0 N/mm² Permeability to water vapour (m): 5 ≤ SD ≤ 50 CLASS II Solvent: Organic solvent
- Call for Price
-
- Waterproofing Products
ISONEM MS RUBBER
- Call for Price
- USAGE AREAS On foundation, shear wall, external walls of the basement, Covering on old or new terraces or roofs, In the re-insulation of old bitumen or bitumen surfaces, On membranes or repairs, In roof gutters, In the insulation of concrete pipe, brick, wood, zinc, aerated concrete etc. surfaces Protection of all concrete surfaces under the ground against corrosion. TECHNICAL…
- Call for Price
-
- Waterproofing Products
ISONEM MS Screed
- Call for Price
- Product Description It is a cement-based floor leveling screed that can be applied in a thickness of 1 - 5 mm and is resistant to cracking and shrinkage. It is resistant to cracking and shrinkage. It is self-propagating and levelling. It has high adherence to the applied surface. Usage Areas It is used before topcoat coating on grounds exposed to…
- Call for Price







