TECHNICAL SPECIFICATIONS

pH (25°C): 7.0 – 9.0

Viscosity (25°C, mPa.s): 12000 – 15000

Density (25°C, g/mL): 1.40 ± 0.10

Solid Content (% Weight): 76 ± 2

Water transmission rate (kg/ m². h^0,5): < 0,1 CLASS W₃

Adhesion strength by pull-off test (N/mm²): Crack bridging flexible systems without trafficking ≥ 0.8

Permeability to water vapour (m): 5 ≤  SD ≤ 50 CLASS II

Solvent: Water

RESULT: ISONEM ANTI FIRE PAINT ” fireproof paint ” test on TS EN 13823: MARCH 2010 standard in TS EN ISO 11925-2 on 02.2012 / 139921 as a result of the test and the test result TS EN 13501-1 / JANUARY 2010 Table B Complies with S1 class d0 criteria.

ACCORDING TO THE TEST RESULT OF TSE EXPERIMENT AND CALIBRATION CENTER PRESIDENCY EX LABORATORY; Reaction of the experiment sample to fire in EN 13501-1 B (in accordance with the European classification) test method: PASSED. In the test method according to the TS EN ISO 11925-2 of the experiment sample;

· Ignition of samples: DID NOT OCCUR

· 150 mm measuring line during the flame test period: DID NOT REACH

· Dripping of samples: DID NOT OCCUR

· Filter paper: DID NOT BURN

· Experiment sample just: MELTED

· Lateral fire spread on the longitude: DID NOT OCCUR

· Fire particles or drops f <10s and f >10s: DID NOT OCCUR

· Smoke spread from the sample into the room: DID NOT OCCUR

SUMMARY OF TSE TEST RESULTS

· Average FIGRA value (W/s): 17,24

· Average THR600s (MJ): 0,93

· Value of average SMORA (m²/s²): 10,58

· Average TSP600s (m): 51,86

· Up to LFS line (mm): DID NOT OCCUR

· Burning drops/particles ≤10s: DID NOT OCCUR

· Burning drops/particles > 10s: DID NOT OCCUR