Welcome to ISONEM USA, Your One Stop Shop For All Paint And Insulation Needs
-
- Floor Coatings, Waterproofing Products
ISONEM MS 82
- Call for Price
- TECHNICAL SPECIFICATIONS Density (25°C, g/mL): 1,40 ± 0,10 pH (25°C): Not applicable (N/A) Viscosity (25°C, mPa.s): 2000 - 4000 Solid content (% Weight): 70 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W₃ Adhesion strength by pull-off test (N/mm2): Rigid system without trafficking ≥ 1.0 N/mm² Permeability to water vapour (m): 5 ≤ SD ≤ 50 CLASS II Solvent: Organic solvent
- Call for Price
-
- Roof Coatings
ISONEM MS POLIA
- Call for Price
- TECHNICAL SPECIFICATIONS Density (25°C, g/mL): 1,30 ± 0,10 pH (25°C): 7,0 – 9,0 Viscosity (25°C, mPa.s): 16000 - 18000 Solid content (% Weight): 70 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3 Adhesion strength by pull-off test (N/mm2): Crack bridging flexible systems without trafficking ≥ 0,8, with trafficking 1,5 N/mm² Permeability to water vapour (m): 5 ≤ SD ≤ 50 CLASS II Solvent: Water
- Call for Price
-
- Roof Coatings
ISONEM MS POLYMER
- Call for Price
- Usage Areas Insulation of terrace roofs and balconies Facades Roofs, woods On old-based bitumen problematic insulation On asphalt and concrete floors TECHNICAL SPECIFICATIONS Density (25°C, g/mL) : 1,00 ± 0,10 pH (25°C) : 7.0 – 9.0 Viscosity (25°C, mPa.s) : 13000 – 15000 Solid content (% Weight) : 46 ± 2 Water transmission rate (kg/ m2. h0,5) : < 0,1 CLASS W3 Adhesion strength by…
- Call for Price
-
- Waterproofing Products
ISONEM MS RUBBER
- Call for Price
- USAGE AREAS On foundation, shear wall, external walls of the basement, Covering on old or new terraces or roofs, In the re-insulation of old bitumen or bitumen surfaces, On membranes or repairs, In roof gutters, In the insulation of concrete pipe, brick, wood, zinc, aerated concrete etc. surfaces Protection of all concrete surfaces under the ground against corrosion. TECHNICAL…
- Call for Price
-
- Waterproofing Products
ISONEM MS Screed
- Call for Price
- Product Description It is a cement-based floor leveling screed that can be applied in a thickness of 1 - 5 mm and is resistant to cracking and shrinkage. It is resistant to cracking and shrinkage. It is self-propagating and levelling. It has high adherence to the applied surface. Usage Areas It is used before topcoat coating on grounds exposed to…
- Call for Price
-
- Roof Coatings
ISONEM Pool Paint
- Call for Price
- TECHNICAL SPECIFICATIONS Density A comp. (25°C, g/mL): 1,25 ± 0,10 Viscosity A comp. (25°C, mPa.s): 1000 - 3000 Solid content (% Weight): 67 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3 Adhesion strength by pull-off test (N/mm2): Rigid system without trafficking ≥ 1.0 N/mm² Permeability to water vapour (m): SD ≤ 5 CLASS I Pot life (23°C): 5 - 6 Hours Solvent: Organic solvent
- Call for Price
-
- Roof Coatings
ISONEM Pool Paint Transparent
- Call for Price
- TECHNICAL SPECIFICATIONS Density A comp. (25°C, g/mL): 0,93 ± 0,10 Solid content (% Weight): 30 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3 Adhesion strength by pull-off test (N/mm2): Rigid system without trafficking ≥ 1.0 N/mm² Permeability to water vapor (m): SD ≤ 5 CLASS I Pot life (23°C): 5 - 6 hours Solvent: Organic solvent
- Call for Price
-
- Floor Coatings, Roof Coatings
ISONEM SB SUPER COMPONENT
- Call for Price
- Usage Areas Concrete terrace and roof insulation, Wet area insulation Concrete roads, parks, and gardens Asphalt roads
- Call for Price
-
- Floor Coatings
ISONEM SHINE FLOOR
- Call for Price
- USAGE AREAS Production and storage facilities, factories, and Industrial Floors. Pool Edges, Tourist Facilities, Coastline, Walkways, Sidewalks, Parks, and Gardens. Wet Working Areas (Food and Beverage Industry) Parking Lots/Floors and Loading Ramps. Ceramic, Marble, and Mosaic-covered terraces, and Balconies TECHNICAL SPECIFICATIONS Density A comp. (25°C, g/mL): 1,20 ± 0,10 Viscosity B comp. (25°C, mPa.s): 1000 - 4000 Water transmission rate (kg/ m2. h0,5): <…
- Call for Price
-
- Floor Coatings, Roof Coatings
ISONEM STREET PAINT
- Call for Price
- USAGE AREAS Garages and light traffic exposed to parking areas Walking paths, garden floors On concrete or asphalt roads, parking areas, Tennis, basketball, volleyball court grounds Game and entertainment areas TECHNICAL SPECIFICATIONS Density (25°C, g/mL): 1,40 ± 0,10 pH (25°C): 7.0 – 9.0 Viscosity (25°C, mPa.s): 9000 - 12000 Solid content (% Weight): 74 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS…
- Call for Price
-
- Roof Coatings, Special Paints
ISONEM THERMAL PAINT
- Call for Price
- TECHNICAL SPECIFICATIONS Density (25°C, g/mL): 0,70 ± 0,15 pH (25°C): 7.0 – 9.0 Solid content (% Weight): 45 ± 2 Solid content (% Volume): 65 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W₃ Adhesion strength by pull-off test (N/mm2): Crack bridging flexible systems without trafficking ≥ 0.8 Permeability to water vapour (m): 5 ≤ SD ≤ 50 CLASS II Certification: TSE K 127 THERMAL PAINT…
- Call for Price
-
- Special Paints
ISONEM UNIVERSAL ASTAR
- Call for Price
- USAGE AREAS Concrete, aerated concrete, plaster, and similar raw walls, Old lime whitewashed, emulsion-based old interior and exterior painted surfaces are used. TECHNICAL SPECIFICATIONS Density (25°C, g/mL): 1,00 ± 0,10 pH (25°C): 7.0 – 9.0 Viscosity (25°C, mPa.s): 8000 - 10000 Solid content (% Weight): 50 ± 2 Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3 Adhesion strength by pull-off test (N/mm2): Crack bridging…
- Call for Price
